Fitting · systems and shanks

Systems do not swap

Two needles can be the same size, take the same thread and suit the same cloth, and still be useless to each other. What decides it is the shank: how long it runs, and whether one side of it is ground flat.

Drawer fronts in an ironmonger with sample parts fixed to each one

What decides whether it fits

Three things, in this order. Nothing after them matters until all three are settled.

  1. 1

    The shank, and the flat on it

    A household machine takes a shank with one side ground flat, and that flat is what keeps the needle from turning in the bar. The 130/705 H system is that shank. The older 15x1 is the round-shank version of a very similar blade, which is why one sits happily in a clamp that the other spins in. Nothing printed on a size tells you which you have: the old needle does.

  2. 2

    The length, from the flat to the eye

    Two needles can share a shank and still be different above the eye. An overlock system such as ELx705 is cut longer in the scarf than a household needle, and that extra length is what lets a looper arrive while the loop is still open. Fit the wrong one and the loop is simply not where the machine goes looking for it.

  3. 3

    The rest is printed on the packet

    Size across the blade, point shape, system. Every packet on this wall states all three on the front. Where a packet does not say, we do not guess on your behalf — we put it back in the drawer.

Three things this counter will not say

A parts counter that promises everything is a parts counter that has stopped listening. These are the three we refuse, and why.

That it will fit your machine.

Needle systems are not interchangeable. The shank length and the flat decide what will go into the bar at all, and neither can be read off a model name given over the telephone. Bring the old needle, or the manual, or the needle still in the clamp.

That it will give you a good stitch.

A stitch comes from the needle, the thread, the cloth, the tension, the plate and the timing acting together. We sell five of those six things and we will not promise you the result of the sixth.

That a part is the one off your machine.

Where a part carries no stamp we will say that we think so, and the reasoning comes with it. For certainty rather than an opinion, bring the old part: the two go on the counter side by side.

What to bring in with you

  • A white garment lying folded on a pale table

    Bring the old needle

    Even a snapped one. The shank and the flat survive most breakages, and between them they rule out three quarters of the wall in about four seconds.

  • A close weave of pale blue and white loops seen from above

    Or the plate, with the plate off

    A photograph of the needle plate and the area under it, taken on a telephone with the plate lifted, tells us more about hooks, feed dogs and plates than any model number does.

  • A beige waffle knit photographed close up

    Then tell us the thread and the cloth

    Whatever is printed on the reel, and what you are sewing into. That pair decides the size, and it is the thing most people mention last.

Three for the bench

All sixteen on the wall
Two toothed steel wheels resting on a surfaceBobbins and cases

Class 15 drop-in case

€9.50

Steel, with the tension screw